Introduction
Product Definition
The B07 Antioxidant Test Reagent is a semi-quantitative detection reagent for rapid screening of antioxidant content in drinking water and industrial water. It is packaged in a 10ml dropper bottle and is ready to use. By adding the reagent to a clear, transparent water sample and observing the reaction result, the approximate antioxidant content range in the water sample can be quickly determined. It is suitable for on-site water quality testing, routine monitoring, and preliminary screening.
Product Features
- Fast detection: reaction time approx. 5s, results available in a short time.
- Easy operation: dropper bottle design, no professional laboratory equipment required.
- Portable and convenient: unit size approx. 6*2cm, weight approx. 8.9g, easy to carry and use on site.
- Wide applicability: suitable for drinking water and industrial water scenarios.
- Semi-quantitative analysis: no complex calculations required; the content range can be quickly determined based on the reaction result.
- Strong environmental adaptability: working environment temperature 0-50℃, humidity ≤85%RH, meeting routine field testing requirements.
- Clear specification: approx. 200 drops per bottle, controllable single-use amount, convenient for daily testing.
Core Parameters
- Product name: Antioxidant Test Reagent
- Model: B07
- Capacity: 10ml
- Drops per bottle (approx.): 200 drops
- Sample solution temperature range: 0-60℃
- Water sample requirement: clear and transparent
- Analysis method: semi-quantitative
- Reaction time (approx.): 5s
- Working environment temperature: 0-50℃
- Working environment humidity: ≤85%RH
- Applicable scenarios: drinking water/industrial water
- Unit size (approx.): 6*2cm
- Unit weight (approx.): 8.9g
- Packaging specification: 100pcs/box
- Box size (approx.): 22.5*21.5*6cm
- Shelf life: 1 year
Usage Scenarios
Suitable for rapid on-site screening of drinking water quality, helping water quality monitoring personnel quickly determine whether the antioxidant content in a water sample is within the expected range at the sampling point.
Suitable for water quality monitoring in industrial water treatment systems, including circulating cooling water, boiler water, process water and other scenarios, facilitating routine operation and water quality management.
Also suitable for other on-site testing situations where rapid, semi-quantitative determination of antioxidant content in water samples is required.
FAQ
Q: Does this reagent need to be used with professional instruments?
A: No. The product uses a semi-quantitative analysis method. After operating according to the instructions, observe the reaction result to complete the interpretation. It is suitable for rapid on-site testing.
Q: What are the requirements for the water sample to be tested?
A: The water sample to be tested should be clear and transparent. If the water sample is turbid or contains suspended matter, it is recommended to filter or clarify it until transparent before testing to avoid affecting the result.
Q: Approximately how many tests can each bottle provide?
A: Each bottle contains approximately 200 drops. The specific number of tests depends on the number of drops required per test. It is recommended to use the amount specified in the instructions.
Q: Are there any special requirements for the operating environment?
A: The working environment temperature should be controlled at 0-50℃, with humidity ≤85%RH. The temperature range of the tested solution is 0-60℃. Exceeding these ranges may affect the detection result.
Q: How should this reagent be stored?
A: It is recommended to store it away from light, sealed, and in a cool, dry place. Tightly close the cap after use. The shelf life is 1 year.
Q: Is the semi-quantitative detection method accurate?
A: The semi-quantitative method is suitable for quickly identifying the antioxidant content range and is suitable for routine screening and on-site monitoring. If precise concentration values are required, it is recommended to use laboratory quantitative analysis methods.
Related Terms
- Antioxidant: A substance that inhibits or slows down oxidation reactions. In water treatment, it is commonly used to reduce the oxidative effects of dissolved oxygen and other factors on water quality.
- Semi-quantitative analysis: A method that determines the content range of a substance quickly based on reaction results without precisely measuring its concentration.
- Water sample to be tested: The water sample to which the antioxidant test reagent is added for reaction detection.
- Reaction time: The time required for the reagent to react with the relevant substances in the tested water sample and produce a result.
- Drops per bottle: The total number of drops that can be dispensed from the entire bottle, used to estimate the number of tests.
- Clear and transparent water sample: A water sample without visible suspended solids or obvious turbidity; a common requirement for semi-quantitative color reaction testing.