Introduction
Product Definition
The G06 Low-Pressure Industrial Boiler Testing Kit is a water quality testing kit specifically designed for heating and small factory industrial boilers with water pressure ≤2.5MPa. Based on GB/T 1576-2018 "Water Quality for Industrial Boilers", it covers key indicators such as feedwater hardness, boiler water alkalinity, and chloride ions, enabling rapid on-site determination of whether water quality meets the safe operation requirements of low-pressure boilers.
G06 is designed for routine operation and maintenance of low-pressure boilers, integrating common laboratory water quality tests into a lightweight, portable on-site solution. With included measuring cups, water samplers, and other tools, operators can complete testing of key risk indicators for feedwater and boiler water directly in the boiler room without specialized laboratory equipment, promptly identifying hidden risks such as scaling, corrosion, and caustic embrittlement to support safe and economical boiler operation.
Product Features
- Precisely adapted to low-pressure applications: Designed specifically for heating/small factory boilers with water pressure ≤2.5MPa. The test items and reagent ranges fully align with the low-pressure boiler water quality control requirements of GB/T 1576-2018, avoiding excessive testing or missing indicators.
- Proactive risk warning: Covers core risk indicators such as feedwater hardness, boiler water alkalinity, and chloride ions to quickly identify hidden issues like scaling, corrosion, and caustic embrittlement, preventing boiler failures and safety accidents in advance.
- Cost-effective long-term use: Each reagent kit supports 40-100 tests. When reagents are exhausted, refill packs can be purchased separately without replacing the entire kit, reducing long-term operating costs.
- Lightweight on-site operation: Includes measuring cups, water samplers, and other tools. No specialized laboratory equipment is required. Operators can complete the full testing process in 10-15 minutes, suitable for confined boiler room spaces.
- Compliance and maintenance support: Test results can be directly incorporated into boiler operation and maintenance records, meeting routine inspection and annual verification traceability requirements, reducing the frequency and cost of third-party testing.
Core Parameters
- Applicable objects: Heating boilers and small factory industrial boilers with water pressure ≤2.5MPa.
- Standard: GB/T 1576-2018 "Water Quality for Industrial Boilers".
- Test parameters: Feedwater hardness, boiler water alkalinity, chloride ions.
- Kit contents: Water quality reagents, measuring cup, water sampler, etc.
- Number of tests: Each reagent kit supports 40-100 tests.
- Testing time: Approximately 10-15 minutes for the complete process.
- Operating conditions: On-site testing, no specialized laboratory equipment required.
Usage Scenarios
- Routine water quality inspection and recording in heating boiler rooms.
- Periodic testing of feedwater and boiler water for small factory industrial boilers.
- Water quality verification after boiler repair, maintenance, or cleaning.
- Self-inspection and data preparation before annual inspection.
- Rapid troubleshooting and identification when boiler water quality is abnormal.
FAQ
Q: Which boilers is the G06 kit suitable for?
A: It is suitable for heating boilers and small factory industrial boilers with water pressure ≤2.5MPa, meeting the water quality testing requirements for low-pressure boilers.
Q: How many tests can one reagent kit perform?
A: Each reagent kit supports 40-100 tests, depending on the test items and reagent consumption.
Q: What should be done after the reagents are used up?
A: Refill packs can be purchased separately. There is no need to buy an entirely new testing kit, reducing subsequent costs.
Q: Is the operation complicated? Does it require laboratory equipment?
A: No, it is not complicated. The kit includes necessary tools such as measuring cups and water samplers. Simply follow the instructions; no specialized laboratory equipment is needed.
Q: Can the test results be used for annual inspection or regulatory records?
A: Yes. The test results are standardized and can be directly incorporated into the boiler operation and maintenance records, serving as reference for routine inspection logs and traceability during annual inspections.
Related Terms
- Low-pressure boiler: Generally refers to industrial boilers with water pressure ≤2.5MPa.
- Feedwater hardness: Total concentration of calcium and magnesium ions in water, indicating scaling tendency.
- Boiler water alkalinity: Content of alkaline substances such as hydroxide and carbonate in boiler water, affecting corrosion and scaling behavior.
- Chloride ion: Indicator of chloride content in water; excessive levels can promote metal corrosion.
- Caustic embrittlement: Brittle cracking of boiler metal caused by the combined effect of high-concentration alkali and tensile stress.
- GB/T 1576-2018: Chinese national standard for industrial boiler water quality, specifying limit values for feedwater and boiler water parameters.